JG-END-PER
Perforated JG Ø13 mm injection lance section, designed for the fixed JG-NOSHOOTER tip. Side holes distribute material along the perforated zone.
Two length variants. The drawing shows product construction and is not to scale.
Specifications and construction
| System | JG Ø13 mm |
|---|---|
| Material | Steel |
| Section lengths | 500 / 1000 mm |
| External diameter | Ø13 mm |
| Internal bore | Ø9 mm |
| Spanner size | 12 mm |
| Distribution holes | Ø3.8 mm |
| Number of holes | 16 holes per metre |
| Connector-side thread | 1/4″ male thread |
| Tip-side end | Socket for the screw-in fixed JG-NOSHOOTER tip |
| Connection to an extension | JG-CONNECTOR 14 socket · 1/4″ female thread · 15 mm spanner |
Role in the assembly
The fixed tip closes the lance end, while material exits through the side holes. The perforated zone can be extended using JG-CONNECT-PER. This is a separate component with 1/4″ male threads at both ends, also used in assemblies with an ejectable tip.
Explore all system components →Installation and extension
Screw the JG-NOSHOOTER tip into the designated end of JG-END-PER. At the 1/4″ male-thread end, join the section to an extension using a JG-CONNECTOR 14 socket.
Tighten the connections and fit JG-HAMMPLUG before driving. Striking an exposed thread or a loosely assembled system can damage the connections.
See step-by-step installation →Build a complete lance
Select the length, perforated zone, tip and connection. The configurator shows the assembly and a list of the required components.
The Ø21.3 mm system uses different connections and its own component versions. Compare both systems →