PI-P 6,5/15 · timber injection packer.
PI-P 6,5/15
Plastic drive-in packer with a non-return valve for timber injection. It remains in the timber and connects using the dedicated CPW coupler.
HAMMPACK EQUIPMENT
Plastic packers for timber injection
Two packers, two connection methods. Choose the model together with the right coupler and the purpose of the treatment.
Enlarge product photograph.
PI-P 6,5/27
Plastic drive-in packer with a non-return valve, designed for a four-jaw coupler. Recommended coupler: CPX-T.
Connecting to the packer
Connect PI-P 6,5/15 using a CPW coupler and PI-P 6,5/27 using a four-jaw CPX-T coupler. Both models are installed in a Ø6 mm borehole.
Documentation and model specifications →
Two models, the same need for secure anchoring
PI-P 6,5/15 and PI-P 6,5/27 differ in length and connection method. Consider timber thickness and condition, access to the injection point and anchoring location. A longer packer alone does not guarantee deeper material penetration.
| Model | Anchoring | Connection | Pressure specified for the model |
|---|---|---|---|
| PI-P 6,5/15 | 6 mm borehole, 15 mm length | Dedicated CPW push-on coupler | Maximum: 30 bar |
| PI-P 6,5/27 | 6 mm borehole, 27 mm length | CPX-T four-jaw coupler | Maximum recommended: 30 bar |
Choose the injection pressure for the treatment, within the selected packer's limit.
Position the injection points
Position injection points according to the grain direction and crack pattern. Choose the material to suit the treatment and timber condition.
Before injection, check that the packer is secure and the coupler connection is leak-tight.