JG-CONNECT
Unperforated JG Ø13 mm injection lance section. Carries material through its internal bore to the injection zone and allows the assembly to be extended section by section.
Two length variants. The drawing shows product construction and is not to scale.
Specifications and construction
| System | JG Ø13 mm |
|---|---|
| Material | Steel |
| Section lengths | 500 / 1000 mm |
| External diameter | Ø13 mm |
| Internal bore | Ø9 mm |
| Spanner size | 12 mm |
| Side holes | None — unperforated section |
| Male threads | 1/4″ male thread at both ends |
| Joining sections | JG-CONNECTOR 14 socket · 1/4″ female thread · 15 mm spanner |
| Ground-facing end | JG-SHOOTER ejectable tip |
Role in the assembly
JG-CONNECT has no perforations. When combined with JG-SHOOTER, material exits through the open end after the tip is displaced. As an extension, it carries material to the next section, including a perforated zone.
Explore all system components →Installation and extension
Join successive sections using the JG-CONNECTOR 14 socket. Hold the lance at its 12 mm spanner flats and the socket with a 15 mm spanner.
Tighten the connections and fit JG-HAMMPLUG before driving. Striking an exposed thread or a loosely assembled system can damage the connections.
See step-by-step installation →Build a complete lance
Select the length, perforated zone, tip and connection. The configurator shows the assembly and a list of the required components.
The Ø21.3 mm system uses different connections and its own component versions. Compare both systems →