SWG
Conical connectionSelect a compatible conical coupler. Approximate bore of the M6×1 version: Ø1 mm.
PRODUCT DATA / HAMMPACK
PI-SPH 10/110
Steel expansion packer for a Ø10 mm borehole. Match the body length and sealing zone to the geometry of the prepared borehole.
Match the borehole and working method.
Check the actual borehole diameter, substrate condition, and seal length and position. Anchorage, sealing and flow are separate selection criteria.
Model body and selected connection — shown separately.SWG
Conical connection. Select a compatible conical coupler. Approximate bore of the M6×1 version: Ø1 mm.
Variants and connections
PRE
Conical connection · thread coatingThe factory-applied coating seals the thread when tightened. This variant allows material passage between packers to be monitored.
FWG
Flat-head connectionRequires a compatible flat-head coupler. Approximate bore of the M6×1 version: Ø1.5 mm.
FPRE
Flat-head connection · thread coatingCombines a flat head with a factory-applied thread coating. Check the supplied components for the variant ordered.
Thread, coupler geometry and sealing method describe separate connection characteristics. Bore diameter in millimetres does not specify delivery rate in l/min.
Specifications and construction
| Material | steel |
|---|---|
| Nominal borehole | Ø10 mm |
| Length | 110 mm |
| Seal length | 39 mm |
| Spanner size | 10 mm |
Selection guidance
- Select the nipple together with a compatible coupler.
- Check the actual borehole, substrate and seal position relative to the crack.
- A larger thread or body does not automatically increase the bore of the complete system.